American Ash Kiln-Dried Woodturning Blank – Rough Sawn
Approx. 52mm x 52mm x 407mm
Approx. 2" x 2" x 16"
This is a kiln-dried American Ash woodturning blank, rough sawn and suitable for a range of small spindle turning projects.
Ash is a strong, attractive hardwood and has become quite expensive to buy in recent years. It is a good wood for practising your cuts, improving tool control and making small finished pieces. It can also produce lovely results when sanded and finished properly.
Suitable Projects
This size is ideal for smaller woodturning projects such as:
● Christmas tree decorations
● Spinning tops
● Small handles
● Light pulls
● Practice spindle work
● Small decorative pieces
At approximately 16" long, you can cut this blank into shorter sections depending on your project. For example, you could cut four pieces of around 4" each, allowing a little extra for trimming and waste.
Rough Sawn Finish
Please note that these blanks are rough sawn. Two sides may look quite rough where the original plank was sawn. This is normal for this type of blank and should be expected.
These are not planed or polished pieces of wood. They are practical woodturning blanks, ready to be cut, mounted and turned.
Why I Supply These Blanks
One of the hardest things about starting woodturning is finding suitable wood to practise on. Not everyone has access to dry hardwood, and buying full boards or large pieces is not always practical.
For that reason, I supply a small range of hardwood blanks that are already cut into useful sizes for woodturners. There is quite a bit of work involved in buying, cutting, sorting, sealing and storing these blanks, but they are useful for beginners and hobby turners who want wood they can actually use.
End Grain Sealed
The end grain has been sealed with PVA glue after cutting to help reduce cracking caused by moisture movement.
As with all real wood, natural variation should be expected. Grain, colour, markings and minor surface checking may vary from piece to piece.
Weight and Shipping
Each blank weighs approximately 0.65kg.
Orders should be kept to around 20kg maximum to keep the parcel weight manageable for shipping. If you need a larger quantity, please contact me before ordering.
Collection is also available and may be the best option if you are buying several blanks or heavier pieces.
More wood may be available than is currently listed online.
Useful for Beginners and Woodturning Students
These blanks are especially useful if you are new to woodturning and do not yet have an easy source of suitable hardwood.
A lot of beginners struggle to find dry hardwood in small, manageable sizes. Buying full boards can be expensive, awkward to transport and wasteful if you only want to practise or make a few small projects.
As a woodturner who also teaches beginners, I cut and supply these blanks in practical sizes so that hobby turners, students and anyone starting out can get straight to the turning rather than spending time trying to source suitable wood.
Please Note
The photos show an example of the type of blank available. They are not the exact pieces you will receive, but your blanks will be of the same general type, size and quality.
